Contents:
With 1/4 drive:
1 Ratchet
1 Sliding T
1 combi-handle 150 mm
1 cardan
1 each extension in 50 and 100 mm
per 1 Socket insert 6-kt.4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
per 1 Socket insert 6-kt. (long version) 4, 5, 6, 7, 8, 9, 10 mm
1 each per Socket Wrench Insert Torx E4, E5, E6, E7, E8 mm
1 each screwdriver bit TORX® T8, T9, T10, T15, T20, T25, T27, T30
1 each screwdriver bit TORX® (with frontal hole) T8, T9, T10, T15, T20, T25, T27, T30
1 each screwdriver bit Phillips PH0, PH1, PH2, PZ0, PZ1, PZ2
1 each screwdriver bit slot 4.5, 5, 6.5, 7 mm
1 each screwdriver bit internal-6-kt. 3, 4, 5, 6 mm
With 3/8 drive:
1 Ratchet
1 tilting extension 125 mm
1 cardan
1 spark-use 18 mm
1 adapter for 8 mm bits
per 1 Socket insert 6-kt.10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
per 1 Socket insert 6-kt. (long version) 10, 11, 12, 13, 14, 15 mm
1 each per Socket Wrench Insert Torx E10, E11, E12, E14, E16, E18
1 each screwdriver bit TORX® T8, T9, T10, T15, T20, T25, T27, T30
1 each screwdriver bit TORX® (with frontal hole) T8, T9, T10, T15, T20, T25, T27, T30
1 each screwdriver bit Phillips PH0, PH1, PH2, PZ0, PZ1, PZ2
1 each screwdriver bit slot 4.5, 5, 6.5, 7 mm
1 each screwdriver bit internal-6-kt. 3, 4, 5, 6 mm
With 1/2 drive:
1 Ratchet
1 tilting extension 125 mm
1 Sliding T
1 cardan
1 adapter for 8 mm bits
1 each spark plug insert 16 and 21 mm
1 each socket wrench insert 6 kt.10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32 mm
per 1 Socket insert 6-kt. (long version) 16, 17, 18, 19, 22 mm
1 each per Socket Wrench Insert Torx E20, E24
1 each screwdriver bit TORX® T8, T9, T10, T15, T20, T25, T27, T30
1 each screwdriver bit TORX® (with frontal hole) T8, T9, T10, T15, T20, T25, T27, T30
1 each screwdriver bit Phillips PH0, PH1, PH2, PZ0, PZ1, PZ2
1 each screwdriver bit slot 4.5, 5, 6.5, 7 mm
1 each screwdriver bit internal-6-kt. 3, 4, 5, 6 mm
Bits:
1 bit each 8 x 30 mm TORX® T40, T45, T50, T55, T60, T70
1 bit each 8 x 30 mm TORX® (with frontal hole) T40, T45, T50, T55, T60, T70
1 bit each 8 x 30 mm Phillips PH3, PH4, PZ3, PZ4
1 bit per 8 x 30 mm slot 8, 10, 12 mm
1 bit each 8 x 30 mm inner-6-kt. 7, 8, 10, 12, 14 mm
Screwdriver:
1 each Angle Screwdriver-6-kt. 1.27, 1.5, 2, 2.5, 3, 4, 5 mm