THREAD LOCKING & MARKING

THREAD LOCKING & MARKING

When working on bikes, thread lock can be important to make sure nuts and bolts stay secure. But sometimes you want to undo them again.

So, we offer different grades of threadlock for different applications. Use medium strength for items that will be dissembled again and high strength where disassembly isn’t planned, like structural fasteners and suspension parts. As well as keeping fixings secure, threadlock will help prevent corrosion on threads.

Also, we offer Bolt Marking, used to indicate fixings haven’t become loose, assembly location and evidence of disassembly or tampering.

Here's our tips on using threadlock:

Clean & degrease both threads thoroughly
Apply a couple of drops of threadlock on the male thread, where the nut will sit.
Fit & tighten the nut to the correct torque figure
Use normal hand tools to undo the fixings. If high strength threadlock has been used, carefully apply heat to the fixings before disamenbly.

Click HERE to see all our tyhread locking & marking products.

Here's some examples from our range:

557.90.40 PETEC THREAD LOCK
HIGH STRENGTH 10G

557.42.56 LOCTITE THREADLOCK
LOW STRENGTH 50ML

557.42.15 LOCTITE THREADLOCK
MEDIUM STRENGTH 50ML

757.20.19 PIPETTE WITH THREAD LOCK
0.3G

557.90.01 PETEC NUT & BOLT SAFETY MARKER
RED 20ML

<< back