1. SELECT YOUR BIKE

Log in to MIKE. Select the bike using model using ‘Search Bike’ function or the ‘Select bike’ drop-downs. TIP! Make sure you select the correct ABS/Non-ABS model as needed.

2. RUN THE CONFIGURATOR

From the lefthand Product Group menu click: 

Brakes/Brakes Front/Brake Hose for front hoses OR

Brakes/Brakes Rear/Brake Hose for rear hoses.

On front kits, depending on the bike, we may offer kits

• ‘As original’ which follow the standard hose pattern
• ‘X-Over’ run from master cylinder to caliper, then caliper to caliper
• ‘Direct’ 2 lines go from master cylinder to each caliper

3. CONFIGURE YOUR KIT 

Click on your chosen kit and to select hose & fitting finishes or add accessories, such as banjo bolts. Once any selections are made, you’ll see pricing and can add it to your basket.

Alternatively, click ‘Expert Mode’ to change hose lengths or fittings for modified bikes eg higher or lower bars, different calipers etc.

To see this information with helpful images to guide you through the selections, click HERE.

Remember, you can also build brake hoses from scratch without any bike selected in our Brake Hose Customiser by clicking HERE.

LARSSON - WHERE THE BIKE TRADE BUYS
MOTORCYCLE PARTS | LUBRICANTS | CONSUMABLES | TOOLS | WORKSHOP EQUIPMENT | DIAGNOSTICS